A good secondhand refrigerator can be a smart buy, whether it's for a first apartment near campus, a garage, or a rental unit between tenants. A bad one costs you the purchase price, a truck rental and the food you lose when it fails a month later. The difference is usually visible if you know where to look and you insist on seeing it running.
Rule one: see it cold
Ask the seller to have the refrigerator plugged in and running for at least a day before you arrive. A fridge that was just plugged in can't prove anything. When you open the doors, the fresh-food compartment should feel cold and the freezer should be frozen hard. Bring a thermometer if you can and leave it inside while you look the unit over. If the seller won't run it, treat the price as if it might need a repair.
The inspection, step by step
| Area | What you're checking | Red flags |
|---|---|---|
| Model and serial label | Photograph it; it's usually inside on a side wall or under the crisper | Missing or unreadable label |
| Door gaskets | Run your hand around every seal; close each door on a slip of paper | Tears, flattened sections, paper slides out freely |
| Interior | Shelves, bins, door racks and light | Cracked liner, missing shelves, persistent odor |
| Freezer back wall | Look for even, light frost or none on frost-free models | Thick frost or ice on the back panel |
| Sound | Listen to the compressor and fans | Loud knocking, grinding, or clicking every few minutes |
| Back and bottom | Condenser coils, tubing and the floor beneath | Oily residue on tubing, rust, signs of water |
| Water and ice | If it has a dispenser, test both | Leaks, cracked tubing, no flow |
What the model number tells you
Search the model number online before you agree to a price. You'll find the original specs, the dimensions, and often how old the design is. Many manufacturers also encode the manufacturing date in the serial number; the method varies by brand, but searching for your brand and "serial number date code" usually turns it up. A refrigerator with a lot of life left will often still have replacement parts readily available. Older models can be fine, but parts may be harder to find.
Next, look up the model on SaferProducts.gov and the CPSC recall list. Refrigerators have occasionally been recalled for issues like electrical components or drawer hazards. A recalled unit isn't necessarily a dealbreaker if the remedy has been done, but you should know before you buy. Our appliance recall checklist walks through the lookup.
Measure everything twice
Columbus housing makes this step more important than it sounds. The narrow doorways and tight kitchens in German Village and the Short North, the steep basement stairs in Clintonville, and the small galley kitchens in many campus-area rentals all limit what fits. Measure:
- The opening where it will live: height, width and depth, plus an inch or so of clearance for airflow.
- Every doorway, hallway turn and stairwell on the path in.
- Door swing: will the doors open fully against the adjacent wall or cabinet?
- Distance to an outlet and a water line, if it has an ice maker.
Many refrigerators let you remove the doors to get through tight spaces, which is usually easier than you'd expect but worth practicing on the old unit first.
Moving it home
Transport the refrigerator upright if at all possible. If it must lie down, many manufacturers recommend letting it stand upright for several hours, sometimes longer, before plugging it in so the compressor oil can settle back where it belongs. Check your model's guidance. Secure the doors closed with tape or a strap and protect the gaskets. Once it's home, give it a full day to reach temperature before loading food.
Brand considerations
Mainstream brands have the deepest parts supply, which makes repairs simpler on a used unit. Before you buy a French-door model with a complex ice system, such as many Samsung refrigerators, test the ice maker and dispenser thoroughly, since those systems are often the most service-intensive part of the appliance. A plain top-freezer model with no dispenser has fewer things that can go wrong.
When to walk away
Pass on any unit that won't get cold after running for a day, that shows oily stains on refrigerant tubing, or whose compressor runs constantly with a hot cabinet. Those point toward the sealed system, which is expensive to repair and needs a technician with refrigerant equipment. If you've already bought one and it's not keeping temperature, our refrigerator repair page explains what a diagnosis looks like. Doing the inspection carefully protects you from most bad deals, and a seller who welcomes it is usually selling a good fridge.
