
Cooktop Repair in Easton & Northeast Columbus, OH
Gas, coil, radiant glass and induction cooktops, including downdraft models and the ignition and control systems behind them. We cover 2 ZIP codes in Easton & Northeast Columbus.
Schedule Your Repair
Four quick steps. We will call to confirm the details before anyone visits.
Service Type
What type of service do you need?
Or call us directly:
(614) 699-4563Four ways to put heat under a pan
A cooktop is a cooking surface installed into a countertop on its own, with no oven underneath. Gas cooktops mix gas and air at each burner and light it with a spark igniter; a valve under each knob controls the flame. Electric coil cooktops pass current through exposed metal elements, while radiant glass-ceramic cooktops hide similar elements under a smooth glass surface. Induction cooktops use coils under the glass to create a magnetic field that heats a compatible pan directly.
Each surface behaves differently. Gas responds instantly and works during a power outage if lit manually, though the igniters need electricity. Radiant glass stays hot after it is switched off. Induction is fast and precise but needs magnetic cookware and relies on sophisticated electronics.
Surface by surface: what tends to go wrong
On gas cooktops, burner ports clog with spills, spark electrodes get wet or dirty, and spark modules fail, producing constant clicking or no spark. Burner caps that are not seated properly produce uneven flames. In rural Central Ohio homes on propane, a cooktop must be set up with propane orifices; a unit still set for natural gas will burn poorly.
Electric coil cooktops wear out elements, receptacles and infinite switches, which control the heat level. Radiant cooktops have similar switches and elements, plus the glass itself, which can crack from impact or thermal shock. Induction cooktops can suffer failed coils, control boards, cooling fans and touch controls, and they may display error codes when cookware is not detected.
Downdraft ventilation adds another layer on some cooktops. A blower under the counter pulls smoke and steam down through a vent beside or behind the burners, and that blower, its filter and its duct can clog with grease or fail. Commercial-style gas cooktops in larger Central Ohio kitchens may also have higher-output burners and simmer features that use dual valves.
Checks an owner can make
For a gas burner that will not light, make sure the cap is centered and dry, and clean the ports with a straightened paper clip, not a toothpick that can break off. If all burners click constantly, moisture or a stuck switch may be the cause; let the cooktop dry after cleaning. If one electric coil does not heat, swap it with a working coil of the same size to see whether the problem follows the element.
For induction, confirm the cookware is magnetic and centered. Check the breaker for electric and induction cooktops. If you smell gas, turn off the burners, leave the house and call the gas utility or propane supplier. If the glass is cracked, stop using that cooktop until it is repaired, as spills can reach live parts.
What a technician considers
A technician will identify the type and model first, since induction troubleshooting is very different from gas. For gas, they check the spark module, electrodes, switches and valves, and confirm the gas supply and the correct orifices for natural gas or propane. For electric, they test elements, switches and wiring. For induction, they read error codes and test the coils, boards and fans. They also consider the cost and availability of glass tops and boards.
Installation is part of the diagnosis too. A cooktop sits in a countertop cutout, so the technician has to reach the wiring junction or gas shutoff in the cabinet below, sometimes behind drawers or a built-in oven. On induction units they check that the cabinet beneath allows enough airflow for the cooling fan, because overheating shows up as shut-offs and error codes that can mimic a board failure.
Caring for the surface
Clean gas burners thoroughly and dry them before reassembly. Wipe radiant glass with a cooktop cleaner and a scraper made for the purpose, and avoid sliding heavy pans. Keep induction cooling vents clear underneath the counter, especially in cabinets where storage might block them.
Keep the knobs and touch controls dry, since moisture can work its way into switches and sensors. Use flat-bottomed pans that match the burner or zone size; warped pans on radiant glass heat poorly and can stress the surface, and on induction they can trigger pan-detection errors. Check the gas shutoff and flexible connector occasionally for corrosion, especially in older Columbus homes where kitchens have been remodeled around original gas lines.
Fixing the surface or replacing the unit
Igniters, switches, elements and spark modules are usually sensible repairs. A cracked glass top or failed induction board on an older unit may make replacement more practical, especially if parts are hard to find. Matching the counter cutout matters when replacing. Glass tops and induction electronics are sometimes covered for longer than other parts, so read the manufacturer's terms before committing.
Other Appliances We Repair in Easton & Northeast Columbus
Cooktop Repair in Easton & Northeast Columbus — FAQ
Can't find your answer? Book a service call or call us now.
Still have questions?
Call or book online and we will help you work out what your appliance needs, anywhere in the Columbus area.
Ready to fix your cooktop in Easton & Northeast Columbus?
Tell us the model number and what the cooktop is doing, and we'll confirm a visit window in Easton & Northeast Columbus.