
Perlick · Reynoldsburg, Brice & Eastland
Perlick Appliance Repair in Reynoldsburg, Brice & Eastland, OH
Perlick, a Milwaukee company, is known for bar equipment such as beer dispensing systems, back-bar and keg coolers and glass frosters, and it also sells residential undercounter refrigeration.
Phones answered 24/7
Schedule Your Repair
Four quick steps. We will call to confirm the details before anyone visits.
Service Type
What type of service do you need?
Or call us directly:
(614) 699-4563Perlick Appliances We Repair in Reynoldsburg, Brice & Eastland
Perlick in the bar world
Perlick is a Milwaukee company with roots in the early 1900s, and bar owners know it for underbar equipment: beer dispensing systems and faucets, back-bar coolers, direct-draw keg coolers, glass frosters, and stainless underbar stations. It also sells undercounter refrigerators, beverage centers, wine reserves and ice makers for homes, often in the same stainless build. In the Columbus area you will find Perlick taps and coolers in Short North bars and campus-area pubs, as well as in finished basements in the suburbs.
This guide is written mostly for bar and restaurant owners, but the undercounter refrigeration advice applies to a home bar as well.
Built for the bar, which shapes how it fails
Perlick's underbar refrigeration is compact and heavily used. Doors and drawers open constantly during service, spills reach the floor and the condenser, and the equipment usually sits under a bar top with little room to breathe. Most of its failures come from that environment rather than from weak engineering.
Back-bar and keg coolers rely on a condensing unit that pulls air from the front or the toe-kick. Lint, dust, straws and bar napkins collect there faster than most owners expect. When the condenser clogs, the cooler runs warm, beer pours foamy, and the compressor works overtime. A clean condenser and a clear airflow path are the first things checked on any warm Perlick cooler, especially in July and August when Columbus bars are packed and the room itself is warm.
Draft beer problems that aren't refrigeration
Foamy or flat beer gets blamed on the cooler, but many draft problems are about gas pressure, line length and temperature balance. A regulator set wrong, a CO2 tank running low, a long-draw line that has warmed, or dirty beer lines can all produce bad pours from a cooler that is holding temperature correctly. Perlick faucets are designed to be easy to clean, but they still need regular line cleaning to stay sanitary and pour well.
When we look at a draft complaint, we check the cooler temperature, the gas pressure and the line condition together. That keeps you from replacing a condensing unit when the real fix is a regulator adjustment or a line cleaning.
Common component failures
Door and drawer gaskets wear quickly in a bar, and torn gaskets let warm air in and cause frost. Drawer slides and door hinges loosen from constant use. Evaporator and condenser fan motors, thermostats and electronic controls are the usual electrical failures, and glass frosters add the stress of running colder than a normal cooler.
On Perlick's undercounter ice makers, the drain and pump system needs attention. These machines must drain meltwater, and many installations rely on a small drain pump. A clogged drain or failed pump causes leaks under the bar and can shut the ice maker down. Refrigerant leaks and compressor failures are sealed-system work for a qualified refrigeration technician, and any cooler showing signs of electrical burning or tripping a breaker should be unplugged.
Long-draw systems, where kegs sit in a walk-in and beer travels through a chilled trunk line to the faucets, add a glycol chiller to the picture, and a warm or failing glycol unit shows up as foamy pours at every tap at once.
Glass frosters and specialty units
A glass froster or a frozen-mug cabinet runs well below normal cooler temperatures, so it shows wear sooner. Frost buildup on the walls is expected, but heavy ice that blocks airflow or keeps the door from closing points to a gasket problem or a door left ajar during service. Manual defrosting on a schedule is part of owning one.
Perlick also builds stainless underbar stations with built-in ice bins and drainboards. Those are not refrigerated, but their drains clog with fruit, straws and ice debris, and a backed-up drain is a common reason bar owners call us when they assume a cooler is leaking. Clearing the drain path first saves you a refrigeration call.
Keeping a stainless bar in service
Perlick supports its equipment through a specialist commercial channel, and gaskets, fans, controls and faucet parts are generally available, though some items for older or discontinued models take longer. Stainless underbar equipment is built to last, so fans, gaskets, controls and drain repairs are almost always worth doing.
Repair becomes harder to justify when an older back-bar cooler needs a compressor and the cabinet is already worn. Even then, replacing a cooler built into a custom bar can mean cabinet work, so weigh that too. Check the manufacturer's warranty first if the equipment is fairly new.
Repairs That Fit Columbus Homes and Businesses
Perlick units usually sit under bars or counters, so we check front-grille ventilation and condenser cleanliness before anything else, then test fans, controls and, on draft systems, the cooling to the taps. We cover Perlick repair across Reynoldsburg, Brice & Eastland in Franklin County.
How It Works
Columbus, Ohio
Ready to schedule your repair?
Columbus ProFix Repair repairs appliances in homes and businesses across Columbus and Central Ohio. Same-day appointments are often available.
Perlick Appliance Repair in Reynoldsburg, Brice & Eastland — Common Questions
Can't find your answer? Book a service call or call us now.
Still have questions?
Call or book online and we will help you work out what your appliance needs, anywhere in the Columbus area.